Skip to main content

Hardware Specifications

Field Guide 05 · 7 min read

About this hardware​

MonstaTek M1

These specifications describe the MonstaTek M1 hardware. Follow the connector and recovery diagrams carefully.

Processor and display​

ItemSpecification
Main MCUSTM32H573VIT6, 32-bit Arm Cortex-M33, 2 MB flash, LQFP100
Wireless processorESP32-C6 for 2.4 GHz Wi-Fi and Bluetooth Low Energy; separate firmware
Display controllerST7586s
Display128 × 64 monochrome display

Radios and connectivity​

ModuleDocumented hardware
NFC / HF RFID13.56 MHz ST25R3916 with a PCB inductive-loop antenna; gain is not applicable or specified for this near-field antenna
LF RFID125 kHz interface with FDX-B reading at 134.2 kHz and an inductive air-coil antenna; gain is not applicable or specified for this near-field antenna
Sub-GHzSi4463 with a −7 dBi, 38.1 × 8.9 mm helical multiband monopole; supports approved frequencies within the 315, 433, 868, and 915 MHz bands
InfraredIR receive and transmit hardware for supported remote-control protocols
USBUSB Type-C with CDC virtual serial and microSD mass storage
microSDUp to 256 GB; FAT32 or exFAT

Identification​

ItemValue
Firmware licenseGPL-3.0
United StatesFCC certified
FCC ID2BSWU-M1
CanadaISED certified
IC34778-M1
ManufacturerWILLTRONICS CO., LTD
ApplicantMonstaTek LLC, San Jose, California, USA

United States and Canada certification​

FCC and ISED certification

The MonstaTek M1 is FCC certified in the United States and ISED certified in Canada under the identifiers listed below.

RegionCertification details
United States — FCCFCC ID 2BSWU-M1, granted December 17, 2025. Grantee: MonstaTek LLC. TCB: IIA Lab Services, LLC. Three grants cover 125 kHz RFID under §15C, 13.56 MHz NFC under §15C, and Sub-GHz operation under §15.231 at 304.5–321.95, 433.075–434.775, and 915.0–927.95 MHz.
Wi-Fi / BluetoothThe FCC filing notes that the device contains a Wi-Fi module; Wi-Fi and Bluetooth Low Energy use the ESP32-C6 module's certification.
RF exposureThe FCC filing meets the portable-use SAR exemption at 5 mm.
Canada — ISEDIC 34778-M1. New Single Certification under RSS-210 Issue 11, RSS-102 Issue 6, and RSS-Gen Issue 5. It covers 125 kHz RFID, 13.56 MHz NFC, and the listed Sub-GHz bands, with PCB, coil, and helical antenna types respectively.
Canadian representativeRepresentative attestation valid November 17, 2025 through November 17, 2027.

Need help? Email support@monstatek.com and include the firmware version and screen name.